Osram MULTIeco Manuel d'utilisateur télécharger pdf

Page 1 of 2

Control unit

Fitting instructions

MULTIeco

Description

Purpose and application

The MULTIeco control unit controls the lighting at the workplace

and in ofces according to the level of daylight and the pre-

sence of persons to increase comfort and save energy.

The control unit can be installed in luminaires (e.g. oor stan-

ding luminaires) or in suspended ceilings.

Function

Sensors measure the brightness in the section to be controlled

and switch on the connected luminaires as soon as the level

of daylight is less than an adjustable brightness switching

threshold.

The sensors also detect the presence of people.

When people are no longer present, the connected luminaires

switch off after an adjustable delay period.

Daylight-dependent switching and presence detection can be

activated and deactivated using various operating modes.

Design

The control unit is made up of the following components:

• Adjusting screw “time” (A): switch-off delay time

• Sensor connection (B)

• DIP switch (C)

• Adjusting screw “lux” (D): brightness switching threshold

• Button connection (E)

• Load contact (F)

• Power supply connection (G)

Safety instructions

The control unit must only be installed and put into operation

by a qualied electrician. The applicable safety regulations and

accident prevention regulations must be observed.

WARNING!

Exposed, live cables or damaged housing.

Danger of electric shock!

• Only work on the control unit when it is de-

energised.

CAUTION!

Destruction of the control unit and other devices

through incorrect mounting!

• Do not operate any other control units on the

control line.

• Use the LMS CI BOX mounting kit for ceiling

installation.

• Ensure that the external pushbutton is designed

for the mains voltage.

• Do not wire the control and pushbutton lines

with an external voltage, especially not a mains

voltage of 230 V.

• Do not exceed the maximum number of electro-

nic control gears.

Installation

Connecting the control unit

Left: Individual operation with max. 2 sensors

Right: Networked operation with up to 4 MULTIeco control units

and central presence detection

H Sensor

J Pushbutton

K Lamp

L Y-Connector

M Y-Connector Screw

N To luminaire group 1

O To luminaire group 2

MULTIeco

Sensor

G B

3 4

2 3

Sensor

MULTIeco

Sensor

MULTIeco

Sensor

MULTIeco

QTi/QT Fit/QTP 5

EVG

QTi/QT Fit/QTP 5

EVG

1 2

MULTIeco 1
40083214053022 2

Résumé du contenu

Page 1 - MULTIeco

Page 1 of 2Control unit Fitting instructionsMULTIecoDescriptionPurpose and applicationThe MULTIeco control unit controls the lighting at the workplace

Page 2 - 40083214053022

Page 2 of 2OSRAM GmbH Kunden Service Center Customer-Service-Center (CSC) Steinerne Furt 62 86167 Augsburg GermanyTel : +49 (0) 1803 677 - 200 (kost

Commentaires sur ces manuels

Pas de commentaire

Osram MULTIeco Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Osram MULTIeco. OSRAM MULTIeco User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Osram MULTIeco